View N74F07N_158411.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
74F07 Inverter/buffer drivers
Product data Supersedes data of 1992 Jul 24 2004 Mar 12
Philips Semiconductors
Philips Semiconductors
Product data
Hex inverter/buffer drivers (open-collector)
74F07
FEATURES
* Open Collector output drive 64mA * High speed * 12V output termination voltage
ORDERING INFORMATION
DESCRIPTION 14-pin plastic small outline package 14-pin plastic dual in-line package
TYPE 74F07
TYPICAL PROPAGATION DELAY 4.5ns
TYPICAL SUPPLY CURRENT (TOTAL) 32mA
TYPE NUMBER N74F07D N74F07N
PKG DWG # SOT108-1 SOT27-1
PIN CONFIGURATIONS
74F07
A0 Y0 A1 Y1 A2 Y2 GND 1 2 3 4 5 6 7 14 13 12 11 10 9 8 VCC A5 Y5 A4 Y4 A3 Y3
SF00017
LOGIC SYMBOLS
74F07
1 3 5 9 11 13
A0
A1 A2
A3 A4 A5
Y0
Y1 Y2 Y3 Y4 Y5
2 VCC = Pin 14 GND = Pin 7
4
6
8
10
12
SF00019
2004 Mar 12
2
Philips Semiconductors
Product data
Hex inverter/buffer drivers (open-collector)
74F07
IEC/IEEE SYMBOLS
74F07
1 2
3
4
5
6
9
8
11
10
13
12
SF00021
LOGIC DIAGRAMS
74F07
A0 A1 A2 A3 A4 VCC = Pin 14 GND = Pin 7 A5 1 3 5 9 11 13 2 4 6 8 10 12 Y0 Y1 Y2 Y3 Y4 Y5
SF00023
INPUT AND OUTPUT LOADING AND FAN OUT TABLE
PINS An Yn Data inputs Data outputs DESCRIPTION 74F (U.L.) HIGH/LOW 1.0/1.0 OC/106.7 LOAD VALUE HIGH/LOW 20A/0.6mA OC/64mA
NOTES: 1. One (1.0) FAST unit load is defined as: 20A in the High state and 0.6mA in the Low state. 2. OC = Open Collector
FUNCTION TABLE
INPUTS An L H NOTES: 1. H = High voltage level 2. L = Low voltage level OUTPUTS Yn L H
2004 Mar 12
3
Philips Semiconductors
Product data
Hex inverter/buffer drivers (open-collector)
74F07
ABSOLUTE MAXIMUM RATINGS
(Operation beyond the limit set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free air temperature range.) SYMBOL VCC VIN IIN VOUT IOUT Tamb Tstg Supply voltage Input voltage Input current Voltage applied to output in High output state Current applied to output in Low output state Operating free air temperature range Storage temperature range PARAMETER RATING -0.5 to +7.0 -0.5 to +7.0 -30 to +5 -0.5 to 12 128 0 to +70 -65 to +150 UNIT V V mA V mA C C
RECOMMENDED OPERATING CONDITIONS
SYMBOL PARAMETER MIN VCC VIH VIL IIk VOH IOL Tamb Supply voltage High-level input voltage Low-level input voltage Input clamp current High-level output voltage Low-level output current Operating free air temperature range 0 4.5 2.0 0.8 -18 12 64 +70 LIMITS NOM 5.0 MAX 5.5 V V V mA V mA C UNIT
2004 Mar 12
4
Philips Semiconductors
Product data
Hex inverter/buffer drivers (open-collector)
74F07
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL PARAMETER TEST CONDITIONS1 MIN IOH VOL High-level output current Low-level output voltage VCC = MIN, VIL = MAX, VOH = MAX, VIH = MIN VCC = MIN, VIL = MAX, VIH = MIN VIK II IIH IIL ICC Input clamp voltage Input current at maximum input voltage High-level input current Low-level input current Supply current (total) ICCH ICCL VCC = MIN, II = IIK VCC = MAX, VI = 7.0V VCC = MAX, VI = 2.7V VCC = MAX, VI = 0.5V VCC = MAX 10 32 IOL = MAX 10% VCC 5% VCC 0.30 0.30 -0.73 LIMITS TYP2 MAX 250 0.50 0.50 -1.2 100 20 -0.6 14 45 A V V V A A mA mA mA UNIT
NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25C. 3. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last.
AC ELECTRICAL CHARACTERISTICS
LIMITS SYMBOL PARAMETER TEST CONDITION VCC = +5.0V Tamb = +25C CL = 50pF, RL = 100 Min tPLH tPHL Propagation delay An to Yn Waveform 1 2.0 3.0 Typ 4.0 5.0 Max 6.0 7.0 VCC = +5.0V 10% Tamb = 0C to +70C CL = 50pF, RL = 100 Min 2.0 2.5 Max 6.5 7.5 ns UNIT
2004 Mar 12
5
Philips Semiconductors
Product data
Hex inverter/buffer drivers (open-collector)
74F07
TYPICAL PROPAGATION DELAYS VERSUS LOAD FOR OPEN COLLECTOR OUTPUTS
18
16
14
12 Propagation delay (ns)
10
8 tPLH 6
4
2
tPHL
0 0 100 200 300 Load resistor () 400 500 600
SF00024
NOTE: When using Open-Collector parts, the value of the pull-up resistor greatly affects the value of the tPLH. For example, changing the specified pull-up resistor value from 500 to 100 will improve the tPLH up to 50% with only a slight increase in the tPHL. However, if the value of the pull-up resistor is changed, the user must make certain that the total IOL current through the resistor and the total IIL's of the receivers does not exceed the IOL maximum specification.
2004 Mar 12
6
Philips Semiconductors
Product data
Hex inverter/buffer drivers (open-collector)
74F07
AC WAVEFORMS
An
VM tPLH
VM tPHL
Yn
VM
VM
SF00026
Waveform 1. Propagation delay for non-inverting outputs NOTE: For all waveforms, VM = 1.5V.
TEST CIRCUIT AND WAVEFORMS
VCC 7.0V 90% VIN PULSE GENERATOR RT D.U.T. VOUT RL NEGATIVE PULSE VM 10% tTHL (tf ) CL RL tTLH (tr ) 90% POSITIVE PULSE 10% tTHL (tf ) AMP (V) 90% VM tw 10% 0V tw VM 10% tTLH (tr ) 0V 90% AMP (V)
Test Circuit for Open Collector Outputs
VM
DEFINITIONS: RL = Load resistor; see AC electrical characteristics for value. CL = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. RT = Termination resistance should be equal to ZOUT of pulse generators.
Input Pulse Definition INPUT PULSE REQUIREMENTS family amplitude VM 74F 3.0V 1.5V rep. rate 1MHz tw 500ns tTLH 2.5ns tTHL 2.5ns
SF00027
2004 Mar 12
7
Philips Semiconductors
Product data
Hex inverter/buffer drivers (open-collector)
74F07
SO14: plastic small outline package; 14 leads; body width 3.9 mm
SOT108-1
2004 Mar 12
8
Philips Semiconductors
Product data
Hex inverter/buffer drivers (open-collector)
74F07
DIP14: plastic dual in-line package; 14 leads (300 mil)
SOT27-1
2004 Mar 12
9
Philips Semiconductors
Product data
Hex inverter/buffer drivers (open-collector)
74F07
REVISION HISTORY
Rev _3 Date 20040312 Description Product data (9397 750 13033); supersedes data sheet 74F06_A_7_A_2 of 1992 Jul 24 (9397 750 05054).
* Delete all references to 74F06A and 74F07A (product discontinued). * Separate 74F06 and 74F07 into standalone data sheets.
_2 19920724 Product data (9397 750 05054); supersedes previous version.
Modifications:
2004 Mar 12
10
Philips Semiconductors
Product data
Hex inverter/buffer drivers (open-collector)
74F07
Data sheet status
Level
I
Data sheet status [1]
Objective data
Product status [2] [3]
Development
Definitions
This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).
II
Preliminary data
Qualification
III
Product data
Production
[1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Disclaimers
Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products--including circuits, standard cells, and/or software--described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
Contact information
For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825
(c) Koninklijke Philips Electronics N.V. 2004 All rights reserved. Printed in U.S.A. Date of release: 03-04
For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
Document order number:
9397 750 13033
Philips Semiconductors
2004 Mar 12 11

▲Up To Search▲

Price & Availability of N74F07N

	To Download N74F07N Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .